Kyocera TASKalfa 400ci - Page 16

2JZ/2JX/2JV/2H7-1
1-1-2
Warm-up time .................................Room temperature 22
°C/71.6 °F, 60% RH
25/25, 30/30 ppm models
Power on: 30 s or less
Low power mode:22 s or less (120 V AC)/20 s or less (220 to 240 V AC)
Sleep mode: 30 s or less
40/40, 50/40 ppm models
Power on: 45 s or less
Low power mode:30 s or less (120 V AC)/26 s or less (220 to 240 V AC)
Sleep mode: 45 s or less
Paper capacity ................................Cassette 1:
500 sh eets (80 g/m
2
, A4/Letter or less),
250 sheets (80 g/m
2
, B4/Legal or more)
Cassette 2: 500 sheets (80 g/m
2
)
MP tray: 100 sheets (80 g/m
2
, A 4/Letter or less),
50 sheets (80 g/m
2
, B4/Legal or more)
Output tray capacity........................Top tray: 250 sheets (80 g/m
2
)
When optional job separator installed: 150 sheets (80 g/m
2
)
Continuous copying ........................1 - 999 sheets
Light source ....................................Inert gas lamp
Scanning system ............................Flat bed scanning by CCD image sensor
Photoconductor...............................a-Si (drum diameter 30 mm)
Image write system.........................Semiconductor laser and electrophotography
Charging system.............................Charging roller
Developing system .........................Hybrid developing
Developer: 2-component
Toner replenishing: Automatic from a toner container
Transfer system ..............................Primary: Transfer belt
Secondary: Transfer roller
Separation system ..........................Separation electrode
Cleaning system .............................Blade and cleaning roller
Charge erasing system...................Exposure by cleaning lamp
Fusing system.................................Belt fusing
Heat source: Halogen heaters
Abnormally high temperature protection devices: thermostats
Main memory ..................................Standard: 2048 MB
Maximum: 2048 MB
Hard disk.........................................25/25, 30/30 ppm models: 80 GB (standard)
40/40, 50/40 ppm models: 160 GB (80 GB x 2, standard)
Interface..........................................USB interface connector: 2 (USB Hi-speed)
Network interface: 1 (10 BASE-T/100 BASE-TX)
KUIO/W slot: 2 (option)
Resolution.......................................600 x 600 dpi
Operating environment ...................Temperature: 10 to 32.5
°C/50 to 90.5°F
Humidity: 15 to 80% RH
Altitude: 2500 m/8,202 ft maximum
Brightness: 1500 lux maximum
Dimensions .....................................605 (W) x 680 (D) x 745 (H) mm (main body only)
23
13/16" (W) x 26 3/4" (D) x 29 5/16" (H) (main body only)
Weight.............................................106 kg/233.7 lb (without toner container and waste toner box)
Space required................................889 mm (W) x 680 (D) mm (using MP tray)
35" (W) x 26
3/4" (D) (using MP tray)
Power source..................................120 V AC, 60 Hz, 12.0 A
220 to 240 V AC, 50 Hz, 7.2 A
Options ...........................................Document processor, paper feeder, 3000-sheet paper feeder, document finisher,
3000-sheet document finisher, center-folding unit, mailbox, punch unit, job separator,
key counter, FAX kit, expansion memory, data security kit, printed document guard kit,
document table and duct unit