2JZ/2JX/2JV/2H7-1
1-5-14
14. Remove the sponge from the wire guide and
release the wire.
15. Move the mirror 1 frame to notch position.
16. Release the wire holder and then remove
the wire.
Figure 1-5-24
17. Remove the screw and remove the expo-
sure lamp from mirror 1 frame.
18. Check or replace the exposure lamp and
then install the lamp.
19. Refit all the removed parts.
Figure 1-5-25
Wire holder
Wire
Mirror 1 frame
Mirror 1 frame
Wire
Sponge
Wire guide
Mirror 1 frame
Mirror 1
frame
Screw
Exposure
lamp
Exposure lamp
To Next Page
Loading...
