Kyocera TASKalfa 400ci - Page 363

2JZ/2JX/2JV/2H7
2-2-5
21. Feed switch 2 (FSW2) ................................. Detects a paper misfeed in the paper cassette paper feed section.
22. Feed switch 3 (FSW3) ................................. Detects a paper misfeed in the paper cassette paper feed section.
23. Registration switch (RSW) ........................... Controls the secondary paper feed start timing.
24. Original size sensor (OSS) .......................... Detects the size of the original.
25. Original detection switch (ODSW) ............... Detects the opening/closing of the original platen (or DP).
26. Home position switch (HPSW)..................... Detects the optical system in the home position.
27. Toner sensor M (TS-M) ................................ Detects the toner density in the developing unit M.
28. Toner sensor C (TS-C)................................. Detects the toner density in the developing unit C.
29. Toner sensor Y (TS-Y) ................................. Detects the toner density in the developing unit Y.
30. Toner sensor K (TS-K) ................................. Detects the toner density in the developing unit K.
31. Waste toner sensor (WTS)........................... Detects when the waste toner box is full.
32. Drum position sensor M (DPS-M)................ Detects positioning of drum rotation (drum unit M).
33. Drum position sensor C (DPS-C)................. Detects positioning of drum rotation (drum unit C).
34. Drum position sensor Y (DPS-Y) ................. Detects positioning of drum rotation (drum unit Y).
35. Drum position sensor K (DPS-K) ................. Detects positioning of drum rotation (drum unit K).
36. ID sensor 1 (IDS1) ....................................... Measures image density for color registration.
37. ID sensor 2 (IDS2) ....................................... Measures image density for color registration.
38. Color release sensor (CRS)......................... Detects separation of secondary transfer rollers M, C, and Y.
39. Transfer position sensor (TPS) .................... Detects positioning of transfer belt rotation.
40. Loop sensor (LS)
*1
....................................... Detects a paper misfeed. Controls the fuser motor.
41. JAM detection sensor (JDS)
*2
...................... Detects a paper misfeed.
42. Eject switch (ESW) ...................................... Detects a paper misfeed in the paper eject section.
43. Feedshift switch (FSSW) ............................. Detects a paper misfeed in the paper feedshift section.
44. Rotary guide sensor (RGS).......................... Detects positioning of rotary guide rotation.
45. Duplex switch (DUSW) ................................ Detects a paper misfeed in the duplex section.
46. Paper full sensor (PFS)................................ Detects whether the output tray is full.
47. MP conveying unit switch (MPCUSW)......... Detects the MP conveying unit.
48. Inner temperature sensor 1 (INTEMS1)....... Detects the inside temperature.
49. Inner temperature sensor 2 (INTEMS2)....... Detects the inside temperature.
50. Outer temperature sensor (OUTTEMS)....... Detects the outside temperature and humidity.
*1: 40/40, 50/40 ppm model only.
*2: 25/25, 30/30 ppm model only.