Kyocera TASKalfa 400ci - Page 428

2JZ/2JX/2JV/2H7-1
2-4-6
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Drum
section
Drum unit Replace Every 300,000
counts
P.1-5-35
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Fuser
section
Fuser unit Replace Every 300,000
counts
P.1-5-41
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Eject sec-
tion
Eject roller Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Duplex A roller Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Duplex B roller Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Guides Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Covers Covers Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Original platen Clean Every 300,000
counts
Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method
Maintenance
cycle
Points and cautions Page
Other Right filter Clean Every service Vacuum. P.1-5-42
Filter dust Clean Every service Vacuum.
Rear upper filter 2 Clean Every service Vacuum. P.1-5-42
Left filter Clean Every service Vacuum. P.1-5-42
Clutches Check Every service Check state of paper conveying
Sensors Check Every service Clean the sensor receiver with a dry
cloth or air blow.
Image quality Check and
adjust
Every service