Lexmark 7462 series - Unsupported Option in Slot <X

• Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1 Turn the printer power o.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option card from the printer system board.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer power back on.
56 Parallel port <x> disabled
<x> is the number of the parallel port.
Try one or more of the following:
• Tou ch Continue to clear the message.
The printer discards any data received through the parallel port.
• Make sure the Parallel Buer menu item is not set to Disabled.
56 Serial port <x> disabled
<x> is the number of the serial port.
Try one or more of the following:
• Tou ch Continue to clear the message.
The printer discards any data received through the serial port.
• Make sure the Serial
Buer
menu item is not set to Disabled.
56 Standard parallel port disabled
Try one or more of the following:
• Tou ch Continue to clear the message.
The printer discards any data received through the parallel port.
• Make sure the Parallel Buer menu item is not set to Disabled.
56 Standard USB port disabled
Try one or more of the following:
• Tou ch Continue to clear the message.
The printer discards any data received through the USB port.
• Make sure the USB Buer menu item is not set to Disabled.
7462
Diagnostic information
197