3 Pinch the tabs securing the sensor (media bin full) to the media tray and remove.
4-bin mailbox assembly sensor
(deflector
gate HP) removal
1 Remove the 4‑bin mailbox assembly left cover. Go to “4-bin mailbox assembly left cover removal” on
page 386.
2 Remove the 4‑bin mailbox assembly rear door assembly. Go to “4-bin mailbox assembly rear door assembly
removal” on page 389.
3 Remove the 4‑bin mailbox assembly left rear inner cover.
4 Release the tabs securing the sensor (deflector gate HP) and remove the sensor from the 4‑bin mailbox
assembly.
7462
Repair information
388
To Next Page
Loading...
