Lexmark 7462 series - Sensor (Offset Stacker Paddle HP) Removal

3 Using your fingers, pinch tab (A) securing the oset stacker sensor (media stack) and remove.
A
Sensor
(oset
stacker paddle HP) removal
1 Remove the oset stacker left cover. Go to “Oset stacker left cover removal” on page 449.
2 Disconnect the harness to the sensor (oset stacker paddle home position).
3 Using your fingers, pinch tab (A) securing the sensor (oset stacker paddle home position) and remove.
A
7462
Repair information
459