Lexmark 7462 series - Paper Types and Weights Supported by the Printer

Paper size Dimensions 250‑ or
550‑sheet
trays (standard
or optional)
Optional
2000‑sheet
tray
Multipurpose
feeder
Duplex unit
Folio
1
216 x 330 mm
(8.5 x 13 in.)
X
Statement
1
140 x 216 mm
(5.5 x 8.5 in.)
X X
Universal
3,4
138 x 210 mm
(5.5 x 8.3 in.) up to
216 x 356 mm
(8.5 x 14 in.)
X X
70 x 127 mm
(2.8 x 5 in.) up to
216 x 356 mm
(8.5 x 14 in.)
XX
X
148 x 182 mm
(5.8 x 7.7 in.) up to
216 x 356 mm
(8.5 x 14 in.)
X
7 3/4 Envelope
(Monarch)
98 x 191 mm
(3.9 x 7.5 in.)
XX X
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.)
XX
X
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.)
XX
X
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.)
XX
X
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
XX
X
1
This size appears in the Paper Size menu only when the paper source does not support size sensing or when size
sensing is turned o.
2
Only the standard exit bin supports this size.
3
This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software
application.
4
To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in); Universal length
must be between 182 mm (7.2 in) and 356 mm (14 in).
Note: An optional 250‑sheet Universally Adjustable Tray is available for sizes smaller than A5, such as index
cards.
Paper types and weights supported by the printer
The printer engine supports 60–176 g/m
2
(16–47 lb) paper weights. The duplex unit supports 63–170 g/m
2
(17–
45 lb) paper weights.
7462
General information
35