Panel Menus
This setting allows the system support person to enable or disable the control panel menus. When disabled,
users are not allowed to access and configure the menus.
1 From the Configuration menu, select Panel Menus.
2 Select Enable or Disable.
Note: Enable is the factory default setting.
3 Depending on your printer model, touch Submit or press the Select button to apply the changes.
PPDS Emulation
This setting allows the user to activate or deactivate the PPDS emulation data stream. When activated, the
following changes also occur:
• The SmartSwitch settings for each port are turned o.
• The printer language is changed to PPDS emulation.
Note: Users can still switch languages on the control panel and through the PJL data stream.
1 From the Configuration menu, select PPDS Emulation.
2 Select Deactivate or Activate.
Note: Deactivate is the factory default setting.
3 Depending on your printer model, touch Submit or press the Select button to apply the changes.
Factory Defaults
Warning—Potential Damage: This operation cannot be undone.
Except the following, this setting enables users to restore the factory default settings.
• Display language
• NETWORK/PORTS menu settings
1 From the Configuration menu, select Factory Defaults.
2 Select one of the following:
• Restore Base—To restore all non‑critical base printer NVRAM settings.
• Restore Network or Restore STD Net—To restore all network NVRAM settings.
Note: This is available only to network printers or printers connected to print servers.
• Restore LES—To restore the factory default settings of the Lexmark Embedded Solutions applications.
This is applicable only to some printer models.
7462
Service menus
281
To Next Page
Loading...
Need help?
General