Print cartridge clamp assembly removal
Note: This procedure can be applied to the left or right printer cartridge hold down assembly.
1 Remove the laser cover. Go to “Laser cover removal (models X651, X652, X654, and X656)” on
page 325 or “Laser cover removal (model X658)” on page 327.
2 Remove the screw (A) securing the print cartridge clamp assembly to the machine.
A
3 Remove the print cartridge clamp assembly.
Print cartridge ID connector assembly removal
1 Remove the print cartridge.
2 Remove the main drive motor assembly. Go to “Main drive motor assembly removal” on page 312.
7462
Repair information
316
To Next Page
Loading...
