High capacity stacker left mounting bracket removal
1 Remove the high capacity stacker left cover. Go to “High capacity stacker left cover removal” on page
436.
2 Remove the eight screws (A) securing the high capacity stacker left mounting bracket.
A
3 Pull the bracket up and let it rest on the assembly with the cables intact.
Sensor (high capacity stacker
deflector
gate HP) removal
1 Remove the high capacity stacker left mounting bracket. Go to “High capacity stacker left mounting
bracket removal” on page 446.
2 Remove the harness from the sensor.
7462
Repair information
446
To Next Page
Loading...
