Sensor (duplex input) removal
1 Remove the duplex input sensor assembly. Go to “Duplex input sensor assembly removal” on page 356.
2 Release the hooks (A) securing the senor (duplex media path) to the bracket.
A
3 Remove the sensor (duplex input).
Sensor (standard bin exit) removal
1 Remove standard bin actuator assembly.
2 Release the hooks (A) securing the sensor (standard bin exit) to the assembly.
A
3 Remove the sensor (standard bin exit).
Sensor (toner density) removal
1 Remove the sensor shield assembly. Go to “Sensor shield assembly removal ” on page 351.
2 Remove the two screws (A) securing the sensor (toner density) to the machine.
3 Remove the sensor (toner density).
7462
Repair information
382
To Next Page
Loading...
