Lexmark 7462 series - Sensor (Offset Stacker Finisher Media bin Present) Removal

4 Remove the LED sensor cover.
Sensor
(oset
stacker
finisher
media bin present) removal
1 Remove the oset stacker LED sensor cover. Go to “Oset stacker LED sensor cover removal” on
page 452.
2 Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3 Remove the harness connected to the sensor (oset stacker finisher media bin present).
4 Remove the oset stacker sensor (oset stacker finisher media bin present).
7462
Repair information
453