Print cartridge cooling fan removal
1 Remove the right side cover. Go to “Right side cover removal (models X651, X652, X654, and X656)” on
page 332 or “Right side cover removal (model X658)” on page 331.
2 Remove the screw (A) securing the print cartridge cooling fan to the machine.
3 Remove the print cartridge cooling fan.
4 Disconnect the connection (B) from the print cartridge cooling fan.
A
B
Installation warning: When replacing the print cartridge cooling fan, ensure that it is installed as shown in
the picture.
Right side cover removal (model X658)
1 Remove the left rear corner cover. Go to “Left rear corner cover removal (model X658)” on page 366.
2 Open the front door.
3 Open the cartridge access door.
7462
Repair information
331
To Next Page
Loading...
