Scanner platen glass cover assembly removal (model X658)
1 Remove the ADF unit assembly. Go to “ADF unit assembly removal (model X658)” on page 561.
2 Remove the scanner left cover. Go to “Scanner left cover removal (model X658)” on page 523.
3 Remove the scanner right cover. Go to “Scanner right cover removal (model X658)” on page 525.
4 Remove the scanner front cover. Go to “Scanner front cover removal (model X658)” on page 526.
Notes:
• Remove the operator panel screw cover strip to access the sixth screw securing the scanner platen
glass cover assembly.
• It is not necessary to remove the operator panel for platen glass removal.
5 Remove the six screws (A) securing the scanner platen glass cover to the assembly.
A
6 Lift and remove the scanner platen glass cover assembly.
Scanner platen glass cover assembly removal (models X651, X652, X654,
and X656)
1 Remove the ADF unit assembly. Go to “ADF unit assembly removal (models X651, X652, X654, and X656)”
on page 560.
2 Remove the scanner front cover. Go to “Scanner front cover removal (models X651, X652, X654, and
X656)” on page 525.
7462
Repair information
527
To Next Page
Loading...
