Lexmark 7462 series - Too Many Trays Attached

4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
58 Too many trays attached
1 Turn the printer
o.
2 Unplug the power cord from the wall outlet.
3 Remove the additional trays.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
59 Incompatible envelope feeder
Try one or more of the following:
• Remove the envelope feeder.
• Tou ch Continue to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin <x>
Try one or more of the following:
• Remove the specified output bin.
• Tou ch Continue to clear the message and continue printing without using the specified output bin.
59 Incompatible tray <x>
Try one or more of the following:
• Remove the specified tray.
• Tou ch Continue to clear the message and continue printing without using the specified tray.
61 Remove defective disk
Try one or more of the following:
• Tou ch Continue to clear the message and continue printing.
• Install a dierent printer hard disk before performing any operations that require a printer hard disk.
62 Disk full
Try one or more of the following:
• Tou ch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the printer hard disk.
• Install a larger printer hard disk.
7462
Diagnostic information
199