8 Remove the alignment assembly.
DC
Installation warning: When replacing the alignment assembly, ensure that the media skew is properly
adjusted using the adjuster screw (C), or jamming will occur. Go to
“Alignment assembly adjustment” on
page 305.
Main cooling fan removal
1 Remove the left side cover. Go to “Left side cover removal (models X651, X652, X654, and X656)” on
page 317 or “Left side cover removal (model X658)” on page 318.
2 Remove the six screws (A) securing the metal shield to the machine.
A
3 Move the metal shield in the direction of the arrow.
7462
Repair information
311
To Next Page
Loading...
