Media tray catch spring removal
1 Remove the 250-sheet frame assembly. Go to “250-sheet tray frame assembly removal” on page 406.
2 Turn the drawer upside down to access the media tray catch spring.
3 Release the media tray catch spring.
Media size actuator removal
1 Remove the 550-sheet controller card assembly. Go to “550-sheet tray controller card assembly removal”
on page 413.
2 Remove the screw (A) securing the media size actuator to the 550-sheet frame.
A
3 Remove the media size actuator.
7462
Repair information
466
To Next Page
Loading...
