Lexmark 7462 series - Laser Cover Removal (Models X651, X652, X654, and X656)

4 Remove connection (B) and the two high voltage connections (C) from the HVPS card assembly.
C
A
B
Installation warning: When replacing the HVPS card assembly, ensure that the two high voltage
connections (C) are properly replaced.
Laser cover removal (models X651, X652, X654, and X656)
1 Remove the ADF unit assembly. Go to “ADF unit assembly removal (models X651, X652, X654, and X656)”
on page 560.
2 Remove the scanner unit assembly. Go to “Scanner unit assembly removal (models X651, X652, X654,
and X656)” on page 531.
3 Remove the scanner control card. Go to “Scanner controller card assembly removal (models X651, X652,
X654, and X656)” on page 520.
4 Remove the four screws (A) from the controller card page.
A
5 Remove the controller card cage.
7462
Repair information
325