High capacity input tray (HCIT) drawer slide assembly removal
Note: The left and right drawer slide assemblies are the same, and only one is in a package. The instructions
below are for removing the left slide; removing the right slide has similar instructions.
1 Remove the HCIT media tray assembly. Go to “High capacity input tray (HCIT) media tray assembly
removal” on page 417.
2 Remove the three screws (A) securing the HCIT drawer slide to the frame of the drawer.
A
3 Remove the HCIT drawer slide.
7462
Repair information
426
To Next Page
Loading...
