4 Disconnect the connection (B) to the sensor (toner density).
AB
Standard bin actuator assembly removal
1 Remove the laser cover. Go to “Laser cover removal (models X651, X652, X654, and X656)” on
page 325 or “Laser cover removal (model X658)” on page 327.
2 Disconnect the connection (A) from the standard bin actuator assembly.
3 Press the tab (B) to release the standard bin actuator assembly from the machine.
A
B
4 Remove the standard bin actuator assembly.
7462
Repair information
383
To Next Page
Loading...
