4-bin mailbox assembly
deflector
gate (bin 1 through 3) removal
1 Remove the 4-bin mailbox assembly rear door assembly. Go to “4-bin mailbox assembly rear door assembly
removal” on page 389.
2 Remove the 4-bin mailbox assembly right rear inner cover.
3 Remove the 4-bin mailbox assembly spring. Go to “4-bin mailbox assembly spring removal” on page
394.
4 Grasp the deflector gate and pull it out of its socket on each side. Carefully remove the diverter from the
machine.
7462
Repair information
395
To Next Page
Loading...
