Lexmark 7462 series - Defective Flash Detected

51 Defective flash detected
Try one or more of the following:
• Tou ch Continue to clear the message and continue printing.
• Cancel the current print job.
52 Not enough free space in
flash
memory for resources
Try one or more of the following:
• Tou ch Continue to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
Try one or more of the following:
• Tou ch Continue to stop the defragment operation and continue printing.
• Format the flash memory. If the error message remains, the flash memory may be defective and require
replacing.
54 Network <x> software error
<x> is the number of the network connection.
Try one or more of the following:
• Tou ch Continue to continue printing.
• Turn the printer o and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
• Check that the serial cable is connected correctly and is the proper one for the serial port.
• Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the
printer and host computer.
• Tou ch Continue to continue printing.
• Turn the printer power o and then back on to reset the printer.
54 Standard network software error
Try one or more of the following:
• Tou ch Continue to continue printing.
• Turn the printer o and then back on to reset the printer.
7462
Diagnostic information
196