Lexmark 7462 series - Sensor (ADF 2 Nd Scan) Removal

3 Open the bottom door assembly.
4 Remove the sensor by squeezing the tabs (A) and removing it from the front of the ADF frame.
A
A
5 Disconnect the lower sensor (ADF lower door interlock) harness.
6 Remove the sensor (ADF lower door interlock).
Sensor (ADF 2nd scan) removal
1 Remove the ADF media pinch pad assembly. Go to “ADF media pinch pad assembly removal” on page
547.
2 Remove the sensor (ADF 2nd scan) harness from the sensor.
7462
Repair information
555