Lexmark 7462 series - Scheduled Maintenance

Scheduled maintenance
The control panel displays an 80.xy error when it reaches 200K page counts. It is necessary to install the
appropriate maintenance kit to maintain the print quality and reliability of the printer. Reset the maintenance
counter after replacing the maintenance kit.
Maintenance kits
Description Part Maintenance interval
Printer maintenance kit (100-V type 1 fuser) 40X4723 300K
Printer maintenance kit (110-V type 1 fuser) 40X4724 300K
Printer maintenance kit (220-V type 1 fuser) 40X4765 300K
Printer maintenance kit (100-V type 2 fuser) 40X4766 150K
Printer maintenance kit (110-V type 2 fuser) 40X4767 150K
Printer maintenance kit (220-V type 2 fuser) 40X4768 150K
ADF maintenance kit includes:
• ADF feed/pick roll assembly
• ADF separator roll and guide
40X4769 120K
Scanner maintenance kit
A scanner maintenance kit (40X8778) is available for this printer.
It contains the following FRUs:
• 40X4540—Pick assembly
• 40X3444—Flatbed assembly
• 40X6406—Separator roll kit
• 3033167—Glass cleaner
There is no operator panel message to indicate when this kit needs to be installed.
This kit should be used if the user is experiencing one or more of these issues:
• Page misfeeds in the ADF (skews, fails to pick)
• ADF paper jams
• Streaks appear on scanned copies, but not on printed pages
• Dark spots or blemishes appear on copies from the flatbed
7462
Maintenance
568