Print cartridge cover assembly removal (model X658)
1 Open the print cartridge cover assembly.
2 Remove the two screws (A) securing the print cartridge cover assembly.
A
3 Remove the cartridge access door.
Bottom side removals
Duplex assembly removal
Note: When removing the duplex drive motor assembly, it does not need to be completely removed from the
machine. It may be allowed to gently hang out of the way by the harness.
1 Remove the duplex drive motor assembly. Go to “Duplex drive motor assembly removal” on page 370.
2 Remove the pick arm assembly. Go to “Pick arm assembly removal” on page 359.
7462
Repair information
355
To Next Page
Loading...
