Lexmark 7462 series - Media Support Removal

Media support removal
1 Gently detach the two bosses (A) of the media support from the machine.
A
A
2 Remove the media support.
Output cover assembly removal (models X651, X652, X654, X656)
1 Open the rear door assembly.
Note: If you do not have a short screwdriver, remove the scanner unit assembly. Go to “Scanner unit
assembly removal (models X651, X652, X654, and X656)” on page 531.
2 Remove the three screws (A) securing the output cover assembly to the machine.
A
3 Remove the output cover assembly.
7462
Repair information
376