Lexmark 7462 series - ADF Transport Drive Motor Bracket Assembly with Cable Removal

6 Remove the screw (B) from the ground strap.
A
B
7 Remove the sensor (ADF media exit) fan bracket assembly.
ADF transport drive motor bracket assembly with cable removal
1 Remove the ADF rear cover. Go to “ADF rear cover removal” on page 538.
2 Remove the ADF transport drive motor bracket tension spring (A).
3 Remove the wires from the retaining clip (B) on top of the bracket.
4 Disconnect the ADF transport drive motor harness.
7462
Repair information
550