Lexmark 7462 series - Fuser Drive Release Linkage Removal

Fuser drive release linkage removal
1 Remove the system card assembly. Go to “System card assembly removal” on page 321
2 Gently unsnap the upper end of the fuser drive release linkage from the machine.
3 Rotate the fuser drive release linkage 90° to release the lower end of the fuser drive release linkage from
the machine.
4 Remove the fuser drive release linkage.
HVPS card assembly removal
1 Remove the right side cover. Go to “Right side cover removal (models X651, X652, X654, and X656)” on
page 332 or “Right side cover removal (model X658)” on page 331.
2 Remove the four screws (A) securing the HVPS card assembly to the machine.
3 Remove the HVPS card assembly.
7462
Repair information
324