Sensor (MFP stapler assembly stapler access door interlock) removal
1 Remove the right cover. Go to “MFP stapler assembly right cover removal” on page 485.
2 Disconnect the harness to the sensor (stapler access door interlock).
3 Using your
fingers,
pinch tab (A) securing the sensor (stapler access door interlock) and remove.
A
Sensor (MFP stapler assembly tamper HP left and right) removal
1 Remove the top cover. Go to “MFP stapler assembly top cover removal” on page 487.
2 Disconnect the harness to the sensor (tamper HP left and right).
7462
Repair information
498
To Next Page
Loading...
