Media turn guide removal
1 Remove the MPF tray door assembly. Go to “MPF tray door assembly removal (models X651, X652, X654,
X656)” on page 340 or “MPF tray door assembly removal (model X658)” on page 343.
2 Gently bend the left side of the media turn guide to release the hook (A) as shown in the picture.
A
3 While gently bending the media turn guide, move the media turn guide in the direction of the arrow.
4 Remove the media turn guide.
Installation warning: When replacing the media turn guide, ensure that it is properly installed, or jamming
will occur.
MPF lift plate assembly removal
1 Remove the media turn guide. Go to “Media turn guide removal” on page 338.
2 Remove the four screws (A) securing the MPF lift plate assembly to the machine.
3 Gently detach the MPF lift plate assembly.
7462
Repair information
338
To Next Page
Loading...
