Lexmark 7462 series - Unsupported Option in Slot [X] Service Check

Unsupported Option in Slot [x] service check
Action Yes No
Remove unsupported internal option.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Standard USB port dsabled
Action Yes No
Step 1
From the operator panel, press the Submit button to clear the
message. The printer discards any data received on the USB port.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
From the control panel, press
until Busy/Waiting
appears, and then reset the printer and the active bin.
Contact the next
level of support.
The problem is
solved.
Too Many Bins Attached service check
Action Yes No
a Turn o the printer, and unplug it.
b Remove the excess bins.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Too Many Disks Attached service check
Action Yes No
a Turn o the printer, and unplug it.
b Remove the excess disks.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
7462
Diagnostic information
211