Lexmark 7462 series - MPF Tray Door Assembly Removal (Model X658)

MPF tray door assembly removal (model X658)
1 Open the MPF tray door assembly.
2 Remove the MPF media guide assembly. Go to “MPF media guide assembly removal (model X658)” on
page 344.
3 Remove the two retaining clips (A) from the hinges on the MPF tray door.
4 Remove the left clip (B) securing the front door tension link.
A
B
5 Remove the left tension link.
6 Pull the right tension link from the hinge.
7 Slide the MPF tray door assembly to the left until all the bosses clear the hinges.
8 Angle the left side of the MPF tray door assembly down, and slide it back to the right until the door is clear
of the right hinge.
9 Remove the MPF tray door assembly.
7462
Repair information
343