3 Pinch the options auto connect (B) to separate the lower interface cable assembly from the 550-sheet frame.
B
A
4 Remove the lower interface cable assembly.
Media size actuator removal
Note: Carefully remove the base machine from the input option tray assembly before proceeding.
1 Remove the 250-sheet controller card assembly. Go to “250-sheet tray controller card assembly removal”
on page 407.
2 Remove the screw (A) securing the media size actuator to the 250-sheet frame.
A
3 Remove the media size actuator.
7462
Repair information
465
To Next Page
Loading...
