Lexmark 7462 series - Scanner Support Platform Removal (Models X651, X652, X654, and X656)

Scanner support platform removal (models X651, X652, X654, and X656)
1 Remove the scanner platen glass cover assembly. Go to “Scanner platen glass cover assembly removal
(models X651, X652, X654, and X656)” on page 527.
2 Remove the six screws (A) securing the scanner support platform to the scanner flatbed frame.
A
3 Remove the two screws (B) securing the plastic cover to the scanner flatbed frame.
4 Remove the last screw (C) under the plastic cover securing the scanner support platform to the scanner.
5 Remove the torroid from the ribbon cable.
7462
Repair information
529