Lexmark 7462 series - Media Damage Check

Action Yes No
Step 5
Check the alignment assembly for proper adjustment. Go to
“Alignment assembly adjustment” on page 305. If necessary,
replace the alignment assembly. Go to
“Output cover assembly
removal (models X651, X652, X654, X656)” on page 376 or
“Output cover assembly removal (model X658)” on page 377.
Does the problem remain?
Go to step 6. The problem is
solved.
Step 6
Perform a print test.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Media damage check
ABC
DEF
Leading edge
Trailing edge
Action Yes No
Step 1
Check the printer installation placement for installation surface
irregularities. Check the printer caster for any damage. If
necessary, correct the installation placement.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Properly load media into the media tray assembly and set all guides
correctly. Properly reinstall the media tray assembly into the printer.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Check the media condition, and load new, dry, recommended
media if necessary.
Does the problem remain?
Go to step 4. Problem is solved.
7462
Diagnostic information
57