ADF pinch roll assembly removal
1 Remove the ADF top door assembly. Go to “ADF top door assembly removal” on page 539.
2 Remove the two screws (A) on either side of the ADF pinch roll assembly.
A
3 Remove the ADF pinch roll assembly.
ADF turn guide removal
1 Remove the ADF pinch roll assembly. Go to “ADF pinch roll assembly removal” on page 545.
2 Remove the ADF separator torque limiter assembly. Go to “ADF separator torque limiter assembly
removal” on page 536.
3 Remove the two screws (A) from the front side. Be sure to secure the ground strap by the upper turn guide
screw when reinstalling.
7462
Repair information
545
To Next Page
Loading...
