Jam access area Printer control panel message What to do
9 Finisher output bin [x]-page jam, remove all pages
from the output bin. Leave paper
in bin [45y.xx]
• Move the left tamper arm to the left and the right
tamper arm to the right, and then remove the
jammed paper from the finisher bin.
• Open the finisher rear door and the trap door, and
then remove any jammed pages.
200-201 paper jams
200 and 201 paper jams
1 To uc h Status/Supplies to identify the location of the jam.
2 Lower the multipurpose feeder door.
3 Push the release latch, and then open the front cover.
3
4 Lift and pull the print cartridge out of the printer.
Warning—Potential Damage: Do not touch the photoconductor drum on the underside of the cartridge.
Use the cartridge handle whenever you are holding the cartridge.
7462
Diagnostic information
62
To Next Page
Loading...
