A
3 Swing the fuser access door assembly away from the machine.
4 Unsnap the fuser access door assembly from the machine.
5 Remove the fuser access door assembly.
Fuser unit assembly removal
1 Remove the fuser wiper cover assembly. Go to “Fuser wiper cover assembly removal” on page 375.
2 Remove the door assembly, rear. Go to “Rear door assembly removal” on page 368.
3 Open the fuser access door.
4 Press the two buttons (A) on the fuser unit assembly to release it from the machine.
7462
Repair information
373
To Next Page
Loading...
