Sensor (scanner HP) assembly with bracket removal
1 Remove the scanner platen glass cover assembly. Go to “Scanner platen glass cover assembly removal
(models X651, X652, X654, and X656)” on page 527 or “Scanner platen glass cover assembly removal
(model X658)” on page 527.
2 Remove the screw (A) securing the HP sensor bracket to the flatbed frame.
A
3 Pull the bracket from the frame, and then remove the sensor wire harness.
4 Remove the sensor (scanner HP) assembly with bracket.
Scanner controller card assembly removal (model X658)
1 Remove the scanner support left cover. Go to “Scanner support left cover removal (model X658)” on
page 514.
2 Remove the left side cover. Go to “Left side cover removal (model X658)” on page 318.
7462
Repair information
517
To Next Page
Loading...
