Lexmark 7462 series - Too Many Flash Options Service Check

Too Many Flash Options service check
Action Yes No
a Turn
o
the printer, and unplug it.
b Remove the excess
flash
options.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Too Many Trays Attached service check
Action Yes No
a Turn o the printer, and unplug it.
b Remove the excess trays.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Incompatible Duplex service check
Action Yes No
a Turn o the printer, and unplug it.
b Remove the incompatible external duplex unit assembly.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Incompatible Envelope Feeder service check
Action Yes No
a Turn
o
the printer, and unplug it.
b Remove the incompatible envelope feeder.
c Plug in the printer, and turn it on.
Does the problem remain?
Contact next level of
support.
Problem is solved.
7462
Diagnostic information
212