Lexmark 7462 series - Sheet Option Tray Removals

550-sheet option tray removals
550-sheet media tray assembly removal
Note: This removal procedure can be applied to 550-sheet option drawer assembly.
1 Find the 550-sheet media tray assembly in the 550-sheet option drawer assembly.
2 Remove the 550-sheet media tray assembly from the 550-sheet option drawer assembly.
550-sheet tray pick arm bracket assembly removal
1 Remove the 550-sheet media tray assembly. Go to “550-sheet media tray assembly removal” on
page 409.
2 Remove the two 550-sheet tray pick arm bracket assembly cable connectors (A) from the 550-sheet tray
controller card assembly.
3 Detach the 550-sheet tray bellcrank recoil spring (B) from the drawer.
7462
Repair information
409