Flatbed scanner skew adjustment
1 Remove the scanner left cover. Go to “Scanner left cover removal (models X651, X652, X654, and X656)”
on page 522 or “Scanner left cover removal (model X658)” on page 523.
2 To adjust the flatbed scanner skew, loosen the screws (A), and then slide the scanner rod mounting plate
left or right accordingly, and then retighten the screws (A).
A
ADF skew adjustment (via ADF document tray)
1 Remove the ADF front and rear covers. Go to “ADF front cover removal” on page 537 or “ADF rear cover
removal” on page 538.
2 Loosen the screws securing the ADF document tray on either side.
Center
0.8
7462
Repair information
293
To Next Page
Loading...
