Lexmark 7462 series User Manual

MFP stapler assembly LED sensor cover removal
1 Remove the screw (A) securing the LED sensor cover to the underside of the output bin.
A
2 Remove the standard output bin LED. Go to “MFP stapler assembly standard output bin LED and LED
clear lens removal” on page 491.
3 Remove the sensor (finisher media bin present). Go to “Sensor (oset stacker finisher media bin present)
removal” on page 453.
7462
Repair information
489

Lexmark 7462 series Specifications

General

Brand	Lexmark
Model	7462 series
Category	Printer
Language	English