Lexmark 7462 series - Offset Stacker Media Stack Flap and Media Stack Flap Actuator Removal

4 Remove the two screws (A) securing the tamper drive motor assembly to the tamper frame.
A
5 Remove the tamper drive motor assembly.
Oset stacker media stack flap and media stack flap actuator removal
1 Remove the
oset
stacker handle cover. Go to
“Oset
stacker handle cover removal” on page 451.
2 Release the locking tab and slide the media stack flap actuator to the right and remove.
7462
Repair information
456