5 While pressing the two buttons (A), pull the fuser unit assembly from the machine.
B
A
Installation warning: When replacing the fuser unit assembly, ensure that the electrical connection (B)
and the two buttons (A) are properly secured.
Redrive assembly removal
1 Remove the rear door assembly. Go to “Rear door assembly removal” on page 368.
2 Open the fuser access door.
3 Remove the two screws (A) securing the redrive assembly to the machine.
4 Press the two tabs (B) to release the redrive assembly to the machine.
5 While pressing the two tabs (B), pull the redrive assembly from the machine.
A
B
B
7462
Repair information
374
To Next Page
Loading...
