Lexmark 7462 series - System Timeout Service Check

Error code Description Action
81 The fuser that had been previously installed in a
dierent printer has reached its maximum page
count.
Go to
“Replace fuser service check” on
page 214.
88A The toner cartridge supply is low. Go to
“Replace cartridge service check” on
page 214.
88C The toner cartridge supply is very low. Go to
“Replace cartridge service check” on
page 214.
88C The toner cartridge supply is empty. Go to
“Replace cartridge service check” on
page 214.
System timeout service check
Action Yes No
Turn o the printer, wait for a few seconds, and then turn on the
printer.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Invalid print cartridge service check
Action Yes No
Install the proper print cartridge.
Does the problem remain?
Contact next level of
support.
Problem is solved.
Defective print cartridge service check
Action Yes No
Step 1
Install the proper print cartridge.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Remove and then reinstall the print cartridge ID connector
assembly. Go to
“Print cartridge ID connector assembly removal”
on page 316.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Replace the print cartridge ID connector assembly. Go to
“Print
cartridge ID connector assembly removal” on page 316.
Does the problem remain?
Contact next level of
support.
Problem is solved.
7462
Diagnostic information
204