5 Remove the two screws (C) securing the ADF transport drive motor bracket assembly with cable to the ADF
feed motor bracket.
C B A
6 Slide the ADF transport drive motor bracket to the right, loosening the transport belt.
7 Remove the ADF transport drive motor bracket assembly with cable.
ADF feed drive motor assembly removal
1 Remove the ADF transport drive motor bracket assembly with cable. Go to “ADF transport drive motor
bracket assembly with cable removal” on page 550.
2 Unfasten and remove all wires from the ADF feed drive motor assembly.
3 Disconnect the ADF feed motor harness from the feed motor.
4 Remove the E‑clip (A) securing one end of the ADF feed/pick roll feed shaft to the ADF feed drive motor
assembly.
7462
Repair information
551
To Next Page
Loading...
