Lexmark 7462 series - Reattach bin <X> - <Y

3 Remove the specified bin.
4 Contact Customer Support.
• Tou ch Continue to clear the message and print without using the specified bin.
Reattach bin <x> – <y>
Try one or more of the following:
• Turn the printer o and then back on.
If the error occurs a second time:
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Reattach the bins.
5 Connect the power cord to a properly grounded outlet.
6 Restart the printer.
If the error occurs again:
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Remove the specified bins.
4 Contact Customer Support.
• Tou ch Continue to clear the message and print without using the specified bins.
Reattach envelope feeder
Try one or more of the following:
• Turn the printer o and then back on.
If the error occurs a second time:
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Remove the envelope feeder.
4 Reattach the envelope feeder.
5 Connect the power cord to a properly grounded outlet.
6 Restart the printer.
If the error occurs again:
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Remove the envelope feeder.
4 Contact Customer Support.
• Tou ch Continue to clear the message and print without using the envelope feeder.
7462
Diagnostic information
190