4-bin mailbox assembly LED card assembly removal
1 Remove the 4-bin mailbox assembly right cover. Go to “4-bin mailbox assembly right cover removal” on
page 390.
2 Disconnect the three wire harnesses attached to the LED card assembly.
3 Remove the three screws (A) securing the LED card assembly to the 4-bin mailbox assembly.
A
4 Remove the 4-bin mailbox assembly LED card assembly.
4-bin mailbox assembly top cover removal
1 Remove the 4-bin mailbox assembly left cover. Go to “4-bin mailbox assembly left cover removal” on
page 386.
2 Remove the 4-bin mailbox assembly right cover. Go to “4-bin mailbox assembly right cover removal” on
page 390.
7462
Repair information
391
To Next Page
Loading...
